Select a category from the drop down menu or type in a keyword, then Apply Filter
The Big-Tee is a premium grade industrial master stream nozzle with an exclusive “flush” feature. Discharge pattern is fully adjustable from straight stream to full fog. Standard flow rates are available at 350, 500 or 700 gpm (1,325, 1,893 or 2,650 Lpm) at 100 psi (6.9 bars) nozzle pressure.
BTM series nozzles are standard industrial grade master stream nozzles made of cast brass construction. BTM nozzles are fully adjustable from straight stream to full fog and are available with flow rates of 350, 500, and 700 gpm at 100 psi.
The HF series monitor nozzle is a water powered system that proportions and delivers either water or foam to the hazard area. The HF series monitor nozzles are available at flow rates of either 350 or 500 gpm (1,325 or 1,893 Lpm) @ 100 psi (6.9 bars).
Nozzle has a built-in self-educting foam proportioning capabilities and has a fully adjustable discharge pattern going from straight stream to full fog with flow rate of 150 or 225 gpm (568 or 852 Lpm) @ 100 psi (6.9 bars).
The LWNS series monitor nozzles are patented water powered nozzle systems that proportions and delivers either water or foam to the hazard area. Three models are available with flows at 350, 500 or 750 gpm (1,325, 1,893 or 2,839 Lpm) @100 psi (6.9 bars), respectively.
The Ranger 3 and 3+ Nozzles, featuring “Smart Nozzle” Technology, is capable of discharging water only, a water foam solution with Hydro-Foam technology using jet pumps or utilizing the automatic self-educting feature with constant/selectable metering, or dry chemical using the Hydro-Chem™ technology. Flow rates are available up to 4,000 gpm (15,100 LPM).
These nozzles can flow water or water/foam solution generated by various proportioning methods from 250 to 2,000 gpm (946 to 7,571 Lpm), depending on model number, while maintaining a nominal 100 psi (6.9 bars) ± 10% to assure maximum effective reach of the water/foam solution over the flow range. The nozzle discharges dry chemical at approximately 20 lbs/sec (9 Kg/sec) through the center of the water/foam stream.
An automatic nozzle with the exclusive combination of self educting/selectable “constant metering” foam proportioning. Rangers 1.0, 1.5 and 2.0 deliver flow ranges of 250 – 1,000, 500 – 1,500 and 750 – 2,000 gpm (946 – 3,785, 1,893 – 5,678 and 2,839 – 7,570 Lpm), respectively while automatically maintaining the tip pressure at a nominal 100 ± 10 psi (6.9 bar) throughout their entire flow range.
A self-educting monitor nozzle with selectable flow rates of 350, 500, and 750 Gpm. Constructed using a lightweight, non-corrosive composite material, anodized aluminum, and stainless steel.
WBB series high-volume nozzles are designed to flow at 750 or 1,000 gpm at 100 psi inlet pressure.